After the root bridge and root ports are selected, the last step in spanning tree is to elect designated ports. How do bridges elect designated ports?
In spanning tree, each segment in a bridged network has one designated port. This port is a single port that both sends and receives traffic to and from that segment and the root bridge. All other ports are placed in a blocking state. This ensures that only one port on any segment can send and receive traffic to and from the root bridge, ensuring a loop-free topology. The bridge containing the designated port for a segment is called the designated bridge for that segment. Designated ports are chosen based on cumulative root path cost to the root bridge.
Note: Every active port on the root bridge becomes a designated port.
If a bridge is faced with a tie in electing designated ports, how does it decide which port will be the designated port?
In the event of a tie, STP uses the four-step decision process discussed in Question 30. It first looks for the BPDU with the lowest BID; this is always the root bridge. If the switch is not the root bridge, it moves to the next step: the BPDU with the lowest path cost to the root bridge. If both paths are equal, STP looks for the BPDU with the lowest sender BID. If these are equal, STP uses the link with the lowest port ID as the final tiebreaker.
What are the four spanning tree port states?
The four spanning tree port states are
Blocking
Listening
Learning
Forwarding
Remember that root and designated ports forward traffic and that nondesignated ports block traffic but still listen for BPDUs.
Important note: There is another port state - Disabled - (No frames forwarded, no BPDUs heard). If it shows up in the answer options - select it along with the others.
What is the STP blocking state?
When a switch starts, all ports are in the blocking state. This is to prevent any loops in the network. If there is a better path to the root bridge, the port remains in the blocked state. Ports in the blocked state cannot send or receive traffic, but they can receive BPDUs.
What is the STP listening state?
Ports transition from a blocked state to a listening state. In this state, no user data is passed. The port only listens for BPDUs. After listening for 15 seconds (if the bridge does not find a better path), the port moves to the next state, the learning state.